WorkSafe fines HW Electrical $40,000 over apprentice on roof without fall protection

HW Electrical Pty Ltd was convicted and fined $40,000 in the Heidelberg Magistrates’ Court after its sole director directed a first-year apprentice to work on a roof close to 2.7 metres above the ground with no fall protection in place.

3 min read
Share this storyLinkedInWhatsAppTeamsFacebookX

A WorkSafe Victoria inspector who attended a workplace at Noble Park in October 2024 saw a first-year apprentice working on the roof of a single-storey dwelling, close to 2.7 metres from the ground, without fall protection. HW Electrical Pty Ltd was convicted and fined $40,000 over the job in the Heidelberg Magistrates’ Court on Thursday 6 August 2026, in an outcome WorkSafe published on 11 August 2026.

The company pleaded guilty to a single charge of failing to provide a workplace that was safe and without risks to health. It was also ordered to pay costs of $2,268.

At a glance

  • Parties: WorkSafe Victoria (prosecutor) and HW Electrical Pty Ltd
  • Court: Heidelberg Magistrates’ Court, sentenced Thursday 6 August 2026
  • Charge: one charge of failing to provide a workplace that was safe and without risks to health, pleaded guilty
  • Outcome: convicted and fined $40,000, plus $2,268 in costs
  • Who it affects: electrical and solar installation contractors carrying out residential roof work in Victoria

The court heard the company had been engaged to install solar panels on the roof of the Noble Park dwelling. According to WorkSafe, the sole director was present when the inspector attended and said he had sent the apprentice onto the roof in the knowledge that no fall protection had been provided.

A safe work method statement, the written document recording how the work is to be done and what controls will be used, was prepared by the director while the inspection was under way, and a guardrail was installed.

WorkSafe Chief Health and Safety Officer Sam Jenkin linked the penalty to employers who disregard their health and safety duties.

“Some employers seem to think they can get away with taking dangerous shortcuts if no one gets hurt, but this sends a clear message that WorkSafe won’t wait for a worker to fall before taking strong enforcement action,” Mr Jenkin said.

Mr Jenkin also said: “Everybody knows working at heights means an appropriate passive fall prevention device, such as a guard rail or harnesses, have to be put in place and there’s no excuse for ignoring the laws in place to protect workers.”

WorkSafe restated the five levels of the hierarchy of controls that apply to falls from height. Level 1 is eliminating the risk where practicable by doing the work on the ground or from a solid construction. Level 2 is a passive fall prevention device such as a scaffold, perimeter screen, guardrail, safety mesh or elevating work platform. Level 3 is a positioning system, such as a travel-restraint system, that keeps employees within a safe area. Level 4 is a fall arrest system, such as a harness, catch platform or safety nets. Level 5 is a fixed or portable ladder, or administrative controls.

WorkSafe has published other falls enforcement and awareness items in the residential solar sector. On 26 August 2026 it reported a crackdown on falls risks in the solar sector, and on 4 September 2026 it reported that a solar installation company had been convicted and fined a total of $100,000 after repeatedly failing to address falls risks at four residential homes in Victoria.

WorkSafe says eligible employers can access free online falls basics workshops, and it publishes a guide to falls prevention.

Source: WorkSafe Victoria, 11 August 2026

General information only. OnNotice reports developments in Australian industrial relations, human resources and workplace law. This article is for education purposes only and is not intended to form professional advice. Always confirm against the primary source and seek specific advice relating to your circumstances.

Share this storyLinkedInWhatsAppTeamsFacebookX

Keep reading